Montigo GTMS Guía para resolver problemas descargar pdf (Pagina 10)

Fan turns on?

Are you using

remote transmitter

GTMF or GTMFS?

1.Replace transmitter with GTMF or GTMFS versionNO NO

YES

Fan RPM changes in

accordance with trasmitter

commands

1. Verify the FCM is connected to AC Power and is ON and that the Fan is plugged

into the FCM receptable marked FAN. If not do it.

2. Verify that the pilot ground wire connection is properly connected to the

appliance chassis, as per the DFC installation manual..

3. Replace FCM.

YES

Aux devices work as

commanded by transmitter

1. Verify the FCM is connected to AC Power and the Aux devices are plugged in.

2. Verify that the DFC board is properly grounded to the appliance chassis as per

DFC board Use and Installation Instruction. If not make proper ground connection.

2. Unplug the Aux device from the Aux outlet of FCM, and plug it into the appliance

120V supply.

2.1 If the Aux device works replace the FCM.

2.2 If the Aux device doesn't work, replace the aux device and connect it to Aux

outlet.

Split flow works as

commanded by the

transmitter

1. Verify the Transmitter has Split flow features.

1. Verify the electrical connections integrity and make sure they are in accordance

with the relevant system wiring diagram. If necessary replace the wire harness.

2. Replace Split Flow.

YES

END

1. Verify the FCM is connected to the AC Power and switch it ON.

2. Verify the electrical connections integrity and make sure they are in accordance

with the relevant system wiring diagram. If necessary replace the wire harness.

3. Unplug the fan from the Fan outlet of FCM, and plug it into the appliance 120V

supply.

3.1 If the fan works replace the FCM.

3.2 If the fan doesn't work, replace the fan and connect to fan outlet.

Turn Fan ON via

transmitter

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios

Montigo GTMS Guía para resolver problemas Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Montigo GTMS