Montigo GTMS Guía para resolver problemas descargar pdf (Pagina 12)

OFF command troubleshooting ﬂ ow chart

OFF

command

Main burner

turns OFF?

1. Verifiy transmitter-receiver communication

2. Remove the electrical wire connector from the EV1 (green base)

and EV2 (red base) on the gas valve. If the main burner still

remains lit continuously, turn off the gas supply to the appliance,

and replace the gas valve.

Pilot turns

OFF?

YES

END

1. Verify the status of the IPI/CPI switch. If the IPI/CPI switch is in

CPI position the system behaves as expected.Otherwise, check

with manufacturer's instruction manual.

2. Remove the electrical wire connector from the EV1 (green base)

on the gas valve. If the pilot still remains lit continuously, turn off

the gas supply to the appliance, and replace the gas valve.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Montigo GTMS Guía para resolver problemas Pagina 12