Montigo GTMS Guía para resolver problemas descargar pdf (Pagina 13)

13

6 Additional troubleshooting information

6.1 DFC power supply veriﬁ cation

Battery supply test

Switch off the FCM if present. Measure voltage between CN1.1 (+) and CN1.3 (-) at the DFC

board (see wiring diagram in the DFC installation manual).

The measured voltage should be between 4.4Vdc and 6.4Vdc. Less than 4.4Vdc could indicate

drained batteries. To be also sure, each single battery level should be measured greater than

1.1Vdc.

6.2 AC/DC supply test

Turn FCM ON or plug in the AC/DC adapter. Measure voltage between CN1.2 (+) and CN1.3 (-)

at the DFC board (see wiring diagram in the DFC installation manual).

The measured voltage should be between 6.7Vdc and 7.3 Vdc for the AC/DC adapter.

The measured voltage should be between 6Vdc and 6.4 Vdc for the FCM.

7 Available documentation

CODE DESCRIPTION LANGUAGE

9957018 880 PROFLAME Use and Installation Instructions GB

9957039 885 PROFLAME Use and Installation Instructions GB

9957063 886 PROFLAME Use and Installation Instructions GB

9957061 PROFLAME DFC Use and Installation Instructions GB

9957015 GT System Use and Installation Instructions FR

9957016 GTM System Use and Installation Instructions FR

9957017 GTMF System Use and Installation Instructions FR

9957028 Prolame GTMF System Use and Instructions FR GB

9957029 Proﬂ ame System with the SPLIT FLOW feature GB

9957030 584 Proﬂ ame GTMF Transmitter GB

9957031 584 Proﬂ ame GTMF Receiver GB

9957032 584 Proﬂ ame GTMF Fan Control Module GB

9957035 584 Proﬂ ame GTMF System GB

9957036 584 Proﬂ ame GTM System GB

9957037 584 Proﬂ ame GT System GB

9957038 584 Proﬂ ame Receiver (S) GB

9957014 Split ﬂ ow Use and Installation Instructions GB

9957100 Pilot Burner Use and Installation Instructions GB

7252627 PROFLAME HI/LO conversion kit GB

7252628 PROFLAME Stepper motor conversion kit GB

7252638 Assembly instructions (LPG) GB

7252639 Assembly instructions (NG) GB

Montigo GTMS Guía para resolver problemas Pagina 13