Montigo GTMS Guía para resolver problemas descargar pdf (Pagina 3)

by use of an OEM supplied conversion kit. The 880 valves can also be upgraded to 885 or 886

conﬁ gurations by installing OEM supplied conversion/ kits.

- The Proﬂ ame 584 Digital Fireplace Control (DFC) is an automatic gas ignition system based

on a single microcontroller core. This family of controls is suited to manage all functions related to

ignition, ﬂ ame sensing and supervision for atmospheric applications.

The Proﬂ ame DFC can be set to provide continuous or intermittent ignition control sequences and

ﬂ ame monitoring with safety shutdown in case of failure.

The Proﬂ ame DFC can be set up as a stand alone AC powered system with battery back up.

When used with the Proﬂ ame 584 Remote Control System the Proﬂ ame DFC can be supplied with AC

power from either an AC wall adaptor or the Fan Control Module via the remote receiver.

- The Proﬂ ame receiver supplies battery back up power for both conﬁ gurations. The Proﬂ ame

GT Series is a modular remote control system that directs the functions of a hearth appliance. The

Proﬂ ame GT is conﬁ gured to control the ON/OFF and ﬂ ame level of the main burner and provides on/

off and Smart thermostatic control of the hearth appliance. The system controls a remotely actuated

120V/60Hz power outlet, Fan speed through six (6) levels and has a constantly powered 120V/60Hz

power outlet.

The Proﬂ ame Receiver (ﬁ g. 1) connects directly to the gas valve, stepper motor and Fan Control

Module with a wiring harness. The receiver is powered by (4) AA type batteries. The receiver

accepts commands via radio frequency from the Transmitter to operate the appliance in accordance

with the particular Proﬂ ame system conﬁ guration. The three-position slider switch on the receiver

can be set to any of the three positions: ON (Manual override), Remote (Remote control) or Off.

- The Proﬂ ame Remote Control System consists of a transmitter and receiver that, when

used in conjunction with a combination gas control valve, controls the functions of the gas hearth

appliance. It is capable of providing ON/OFF and thermostatic control of the appliance when used

in it’s most basic form, or may be conﬁ gured to work with an electronically modulating control to

provide variable ﬂ ame height and Smart thermostat operation. The system can be further upgraded

to include a Fan Control Module that is capable of controlling power to a remotely controlled ON/OFF

120V/60Hz outlet, a constantly powered 120V60Hz power outlet, and a variable outlet that provides

six (6) different fan speeds. The Proﬂ ame Transmitter uses a streamline design with a simple button

layout and informative LCD display. A Mode Key is provided to index between the features and a

Thermostat Key is used to turn on/off or index to through the Thermostat functions.

- The Proﬂ ame GT Series is a modular remote control system that directs the functions of a

hearth appliance. The Proﬂ ame GT is conﬁ gured to control the ON/OFF and ﬂ ame level of the main

burner and provides on/off and Smart thermostatic control of the hearth appliance.

The Proﬂ ame Fan Control Module (FCM) offers the added ability to control the fan speed from off

through six (6) speeds, a remotely actuated 120V outlet in addition to providing a constantly powered

120V outlet. The FCM provides DC power to the receiver & DFC board allowing the batteries to be

used only when line power is interrupted or lost.

- The Split Flow burner controller has one inlet and two outlets. The inlet is connected to

the outlet of the appliance main safety valve, while the outlets are connected to the primary and

secondary burners respectively. The primary outlet is always open, simply allowing the gas ﬂ ow

from the safety valve to the primary burner. The secondary outlet is controlled by the Split Flow and

can be open or closed at the user request. A 6VDC pulse is applied to the solenoid which opens a

valve allowing gas to ﬂ ow to the burner. The valve will remain open until a pulse of opposite polarity

is applied to the coil. The Split Flow is NOT a safety device, and is only used for controlling burner

sections in a gas appliance. The appliance manufacturer must verify that the burners light correctly

when the appliance is put into operation with either one or two burners being lit at a time. The Split

Flow is fully compatible for use with the Proﬂ ame remote control system.

1 2 3 4 5 6 7 8 ... 15 16

Comentarios a estos manuales

Sin comentarios

Montigo GTMS Guía para resolver problemas Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Montigo GTMS