Montigo L-Series DF-ST Guía de instalación descargar pdf (Pagina 17)

Page 17

L-Series DF-ST See-thru Gas Fireplace

Part No. XG0812

f i r e f e a t u r e

Maintenance

Gas Control Valve Troubleshooting

L-Series DF-I

Manifold Pressure

Test Connection

Pilot Adjustment Screw

Inlet

Pressure

Powe r

Gene rator

Wall Switch

Figure 33. Sit Nova 820 gas valve.

Pilot Burner Adjustment

1. Locate Pilot Adjustment Screw. (See gure 33.)

2. Adjust pilot screw to provide properly sized ame as shown in

gure 34).

3. After installing or servicing, leak test with a soap solution with

main burner on. Coat pipe and tubing joints, gasket etc. with soap

solution. Bubbles indicate leaks. Tighten any areas where the

bubbles appear until the bubbling stops completely.

Figure 34. Pilot Burner.

Troubleshooting

The following is a troubleshooting chart of possible problems:

PROBLEM CORRECTIVE ACTION

Noisy Pilot Flame Locate pilot adjustement screw on

gas control valve. Flame is decreased by

turning adjustment screw clockwise.

Pilot won’t ignite Disconnect remote wires and try to

light pilot. If pilot now works, remote

connections are faulty. Check wiring

diagram gure 33.

Main burner will 1. Check wiring (see gure 33).

not light 2. Check wall switch for proper con-

nection.

L-Series-DF-ST

If your replace still does not operate correctly, consult your dealer or

the manufacturer.

All service and repairs should be performed by a qualied

agency.

All spare parts, optional fans, and optional trim nishes are available

from your local dealer or the manufacturer.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comentarios a estos manuales

Sin comentarios

Montigo L-Series DF-ST Guía de instalación Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Chimeneas Montigo L-Series DF-ST